I-412 "Red Fox Pup" Ornament

Select -  1+ to buy paper pattern or click box download pattern.
Intermediate 4″ wide x 5" high   41 pieces
Woodland Ornament "Red Fox Pup" peeking out of a tree knot hole.
I used the following  3/4” & 1/2" thick wood for this project; 
Red Fox - 3/4" Spanish Cedar for the Medium, Western Red Cedar for the Medium Dark, Walnut & Spanish Cedar for the eyes, Aspen for the White, and 3/4" Ambrosia Maple for the sides of the opening.
I used 1/2" thick Western Red Cedar for the tree portion on the front and the back of the ornament. I used the WRC because it is light weight.
A Wonder Wheel  or use a 6" diameter wire brush for adding texture. I attached the wire brush to my bench grinder, be sure to wear eye protection.
Suggested Blades:  Gold #5 for Western Red Cedar, Pine, or any softwood. Platinum Plus #3,  Platinum #5,  TLB #5  for the Aspen and Basswood.  PLP #2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).

Click to check out the rest of the "Woodland Ornaments.

The two sides are glued on top of the back section, then the sides are sanded to make an oval shaped ornament.

All of the parts are glued on top of the back section. 

You will not need a backing for this project.

 

6" wire brush attached to the bench grinder to add a rough texture to the exterior.



Handscrew clamp modified (cut notch) to hold the dowels for drilling.  

Intarsia pattern designed by Judy Roberts. See why our patterns are the best!