- 1+ to buy paper pattern or click box download pattern.
Beginner/Intermediate Level 4″ wide x 5" high 30 pieces
I used 1/2" thick Western Red Cedar for the tree portion on the front and the back of the ornament. Woodland Ornament series. I used the WRC because it is light weight. 3/8" Walnut dowels for the eyes. A Wonder Wheel and a 6" diameter wire brush was used for adding texture. I attached the wire brush to my bench grinder, be sure to wear eye protection.
Suggested Blades: Gold #5 for Western Red Cedar, Pine, or any softwood. Platinum Plus #3, Platinum #5, TLB #5 for the Aspen and Basswood. PLP #2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).
6" wire brush attached to the bench grinder to add a rough texture to the exterior.
Handscrew clamp modified (cut notch) to hold the dowels for drilling.
The two sides are glued on top of the back section, then the sides are sanded to make an oval shaped ornament.
All of the parts are glued on top of the back section.
You will not need a backing for this project.
Intarsia pattern designed by Judy Roberts. See why our patterns are the best!
Beginner/Intermediate Level 10 1/4″ wide x 16" high 65 piecesFall pumpkin with a curious crow. I used the following 3/4”...
Beginner/Intermediate Level 13 1/2" tall by 7 1/4", 11 3/4" tall by 7" 15 pieces each Download the Christmas Deer Pattern, select the option...
Intermediate Level 13 1/4″ wide x 17 3/4" high 68 pieces Front view of a large Elephant Shelf, the...
Select - 1+ to buy paper pattern or click box download pattern.Beginner/Intermediate 4″ wide x 5" high 35 pieces"Squirrel" peeking out...