- 1+ to buy paper pattern or click box download pattern.
Beginner/Intermediate Level 4″ wide x 5" high 37 pieces
Saw-whet owl peeking out of a tree knot hole. Woodland Ornament series.
I used the following 3/4” thick wood for this project;
Spalted Hackberry for the "LT", Spalted Maple for the "ML", "M", & "MD", Peruvian Walnut for the "D" eyelids.
I used 1/2" thick Western Red Cedar for the tree portion on the front and the back of the ornament. I used the WRC because it is light weight.
1/2" Maple and 5/16" Walnut dowels for the eyes. I used a modified hand screw clamp to drill the dowels.
A Wonder Wheel and a 6" diameter wire brush was used for adding texture. I attached the wire brush to my bench grinder, be sure to wear eye protection.
Suggested Blades: Gold #5 for Western Red Cedar, Pine, or any softwood. Platinum Plus #3, Platinum #5, TLB #5 for the Aspen and Basswood. PLP #2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).
Click to check out the rest of the "Woodland Ornaments.
6" wire brush attached to the bench grinder to add a rough texture to the exterior.
Handscrew clamp modified (cut notch) to hold the dowels for drilling.
The two sides are glued on top of the back section, then the sides are sanded to make an oval shaped ornament.
All of the parts are glued on top of the back section.
You will not need a backing for this project.
Intarsia pattern designed by Judy Roberts. See why our patterns are the best!
Beginner/Intermediate Level 10 1/4″ wide x 16" high 65 piecesFall pumpkin with a curious crow. I used the following 3/4”...
Intermediate Level 19″ wide x 17" high 115 pieces A great Christmas piece, the poinsettias and pine cones are on a...
Beginner/Intermediate Level 13 1/2" tall by 7 1/4", 11 3/4" tall by 7" 15 pieces each Download the Christmas Deer Pattern, select the option...
Select - 1+ to buy paper pattern or click box download pattern.Beginner/Intermediate 4″ wide x 5" high 35 pieces"Squirrel" peeking out...