I-407 Barn Owl Ornament

Buy 3 or more $6.95 Patterns - Only $6.25 Each




-  1+ to buy paper pattern or click box download pattern.
Beginner/Intermediate Level   4″ wide x 5" high   30 pieces
I used 1/2" thick Western Red Cedar for the tree portion on the front and the back of the ornament. Woodland Ornament series. I used the WRC because it is light weight. 3/8" Walnut dowels for the eyes. Wonder Wheel  and a 6" diameter wire brush was used for adding texture. I attached the wire brush to my bench grinder, be sure to wear eye protection.
Suggested Blades
:  Gold #5 for Western Red Cedar, Pine, or any softwood. Platinum Plus #3,  Platinum #5,  TLB #5  for the Aspen and Basswood.  PLP #2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).

Click to check out the rest of the "Woodland Ornaments.

Intarsia Woodland Ornaments




6" wire brush attached to the bench
grinder to add a rough texture to the exterior.
Handscrew clamp modified (cut notch) to hold the dowels for drilling.  





The two sides are glued on top of the back section, then the sides are sanded to make an oval shaped ornament.

All of the parts are glued on top of the back section. 

You will not need a backing for this project.



Intarsia pattern designed by Judy Roberts. See why our patterns are the best!


Related Items