I-308 Tree Top Santa SALE

Intermediate Level   5 ½” x 10 ¾”  34 pieces. 
Santa holding a small Christmas tree. Front and Back Design with hollow base for a Christmas tree topper. A Wonder Wheel  was used for adding texture. Woods Used:  Red Heart, Aspen for the White, Basswood, Poplar, Yellow Heart. Suggested Blades:  Gold #5 for Western Red Cedar or any softwood. Platinum Plus #5,  Platinum #5,  TLB #5  for the hardwoods.  PLP-2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut). 
The Red Heart Santa was created in 2022. The photos below are the original Santa made in 2012, Woods Used:  Various shades of Western Red Cedar, Aspen for the White, Basswood, Poplar, Yellow Heart. 
Intarsia pattern designed by Judy Roberts. See why our patterns are the best!

The Red Heart Santa was created in 2022. The photos below are the original Santa made in 2012, Woods Used:  Various shades of Western Red Cedar, Aspen for the White, Basswood, Poplar, Yellow Heart.
Photo Below; Before sanding, I drilled a small hole on the top of the tree and the star, then cut off a thumb tack to hold the star in place. Also you can see the parts I glued together, then applied the finish. I used masking tape to keep the finish off the areas that will be glued together.