I tested the sander on some Hard Maple (Janka Hardness 1,450) Wenge (Janka Hardness 1,930) and Pau Santo (Janka Hardness 3,280).
These pads may be a tight fit onto the shaft. I recommend putting a little Ivory Dish soap either on the arbor or add a few drops inside the hole. If you push too hard it could cause the foam to twist causing the pad to bounce. If your sleeve bounces too much take it off the arbor and roll it like a rolling pin to relax the foam. Then slide it on the arbor in a different position, don't follow the same groove.
Sanding pads for the Flex Drum Sander are 2 3/4" x 7" available in 80, 80X, 120, 180, and 220 grits.
I sand the wood down to various thicknesses with the 80 grit pads. I go through more of the 80's than the other grits. Sample order; four 80 grit, two 120 grit, one 180 grit, and one 220 grit.
To improve the life of the pad try the following tips:
• Keep moving the wood you are sanding across the entire surface of the pad. Keeping the wood in one area and pressing hard can cause the foam to shrink.
• If the sleeve becomes loose from the pad you can use a little glue to hold the sleeve.
Use the Abrasive Cleaning Stick often to clean the pad. To order a Flex Drum Sander click on this link.
This stick is great for giving your sanders extra life. It removes dust and resin from the sander sleeves. The...
The Daylight Slimline LED Magnifying Lamp provides high contrast which makes this lamp the best tool for scroll sawing intricate...
This soft drum sander will help you attain the soft contours on your Intarsia projects. This specially designed unit clamps...
1/2" Adapter Shaft for mounting the Flex Drum Sander on a drill press. The adapter shaft fits in the chuck...